Product ID:INTERLUX BEDDING COMP., Y214
MSDS Date:06/19/1997
FSC:8010
NIIN:00N091434
Status Code:A
MSDS Number: CJLGF

COURTAULDS COATINGS INC

6001 ANTOINE DR
HOUSTON, TX 77091-3503
US

Emergency Phone: 800-854-6813

Info Phone: 713-684-1223; 713-684-1563

Cage: 028S6

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 713-684-1244

Cage: 028S6

TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

OSHA PEL see Table Z-3

ACGIH TLV: 2 MG/M3

STODDARD SOLVENT; (WHITE SPIRIT)

CAS: 8052-41-3

RTECS: WJ8925000

OSHA PEL 2900 MG/M3;500 PPM

ACGIH TLV: 525 MG/M3;100 PPM

SILICA, CRYSTALLINE-QUARTZ; (SILICA-CRYSTALLINE)

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL see Table Z-3

ACGIH TLV: 0.1 MG/M3

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CAUSES NOSE AND THROAT
IRRITATION. HARMFUL IF INHALED. MAY AFFECT THE BRAIN OR NERVOUS
SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. HARMFUL IF INHALED.
EYE CONTACT: CAUSES EYE IRRITATION. SKIN CONTACT: CAUSES SKIN
IRRITATION. INGESTION: HARMFUL IF SWALLOWED. CHRONIC: CANCER
HAZARD. CONTAINS AN INGREDIENT WHICH CAN CAUSE CANCER. RISK OF
CANCER DEPENDS ON DURATION AND LEVEL OF EXPOSURE. OVEREXPOSURE TO
RESPIRABLE CRYSTALLINE SILICA DUST CAN CAUSE SILICOSIS, A FORM OF
PROGRESSIVE PULMONARY FIBROSIS.
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ: IARC
MONOGRAPHS, VOL 68, 1997, GROUP 1. NTP 8TH ANNUAL REPORT ON
CARCINOGENS, 1998: REASONABLY ANTICIPATED TO BE CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.

First Aid:GENERAL: IN ALL CASES OF DOUBT, OR WHEN SYMPS PERSIST, SEEK
MED ATTN. NEVER GIVE ANYTHING BY MOUTH TO UNCON PERSON. INHAL:
REMOVE TO FRESH AIR. IF DISCOMFORT IS PRESENT OR BREATHING IS
ABSENT GET MED ATTN IMMEDIATELY. EYE CONTACT: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR AT LEAST 15 MINUTES UNTIL IRRITATION
SUBSIDES. IF IRRITATION PERSISTS, GET MED ATTN. SKIN CONTACT: FLUSH
W/LARGE AMOUNTS OF WATER . USE SOAP IF AVAILABLE. REMOVE SEVERELY
CONTAMINATED CLOTHING (INCLUDING SHOES) & WASH BEFORE REUSE. IF
IRRITATION PERSISTS, GET MED ATTN. INGEST: IF SWALLOWED, DO NOT
INDUCE VOMITING. KEEP AT REST. GET PROMPT MED ATTN.

Flash Point:=37.8C, 100.F
Lower Limits:1%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:OSHA CLASSIFICATION: COMBUSTIBLE LIQUID -
CLASS II. ISOLATE FROM HEAT, SPARKS, ELECTRICAL EQUIP & OPEN FLAME.
CLSD CNTNRS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. IN ABSENCE OF
ELECTRICITY, A WATER S PRAY (A FOG NOZZLE IS PREFERRED) MAY BE USED
TO COOL CNTNRS. DECOMPOSITION & COMBUSTION PRODS MAY BE TOXIC.

Spill Release Procedures:CONTAIN SPILLED LIQUID WITH SAND OR EARTH. DO
NOT USE COMBUSTIBLE MATERIALS SUCH AS SAWDUST. ABSORB SPILL WITH AN
INERT MATERIAL (EG, DRY SAND OR EARTH), THEN PLACE IN A CHEMICAL
WASTE CONTAINER.

Handling and Storage Precautions:KEEP CONTAINER CLOSED. LOOSEN CLOSURE
CAUTIOUSLY BEFORE OPENING. STORE IN A COOL, WELL VENTILATED PLACE
AWAY FROM INCOMPATIBLE MATERIALS (SEE SECTION ON STABILITY AND
REACTIVITY). KEEP AWAY FROM HEAT, SPARKS AND FLAMES. PROTECT
MATERIAL FROM DIRECT SUNLIGHT.
Other Precautions:GROUND AND BOND CONTAINERS WHEN TRANSFERRING
MATERIALS. EMPTY CONTAINERS MAY RETAIN HAZARDOUS PROPERTIES. FOLLOW
ALL MSDS/LABEL WARNINGS, EVEN AFTER THE CONTAINER IS EMPTIED.

Respiratory Protection:USE A RESPIRATOR APPROVED BY NIOSH AND IN
ACCORDANCE WITH 29 CFR 1910.134 TO REMOVE PARTICULATES (AND VAPORS
IF THERE IS OVEREXPOSURE TO VAPORS GENERATED DURING THE PROCESSING
OF THIS PRODUCT).
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO: A) KEEP TLV
OF HAZ INGREDS BELOW LIMITS SPECIFIED IN INGRED SECTION, B) REMOVE
VOLATILES PRODUCED (SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH AND DELUGE SHOWER .
AS NEEDED, USE BODY PROTECTION TO AVOID CONTACT WITH PRODUCT.
Supplemental Safety and Health
VENT: DURING WELDING OR CUTTING ON SURFACES COATED W/THIS PRODUCT.

Boiling Pt:=157.2C, 315.F
Vapor Density:HVR/AIR
Spec Gravity:1.643
Evaporation Rate & Reference:SLOWER/ETHER
Appearance and Odor:LIQUID.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION AS IN WELDING. FUMES MAY PRODUCE CARBON
DIOXIDE AND CARBON MONOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Toxicological Information:THERE IS NO DATA AVAILABLE ON THE PRODUCT
ITSELF. NOTICE: REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE. INTENTION AL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.

Ecological:THERE IS NO DATA AVAILABLE ON THE PRODUCT ITSELF.

Transport Information:DOT (DEPARTMENT OF TRANSPORTATION): PROPER
SHIPPING NAME: PAINT. HAZARD CLASS: FLAMMABLE LIQUID, 3. UN NUMBER:
UN1263. PACKING GROUP: NOT REGULATED.

SARA Title III Information:SARA TITLE III (SUPERFUND AMENDMENTS AND
REAUTHORIZATION ACT): NONE KNOWN.
Federal Regulatory Information:TSCA (TOXIC SUBSTANCE CONTROL ACT):
COMPONENTS OF THE PRODUCT ARE LISTED ON THE TSCA INVENTORY. CERCLA
(COMPREHENSIVE RESPONSE COMPENSATION, AND LIABILITY ACT): WE
RECOMMEND YOU CONTACT LOCAL AUTHORIT IES TO DETERMINE IF THERE MAY
BE OTHER LOCAL REPORTING REQUIREMENTS.
State Regulatory Information:CALIFORNIA PROPOSITION 65: WARNING: THIS
PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO
CAUSE CANCER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.